Monday, July 29, 2013

Wine Cork Shadowbox


Machine Used: BossKut Gazelle
Software: Funtime Scrapbooking IV
Materials: 11 x 14 Black Top Loading Shadowbox, Oracal 631 vinyl (indoor)

This project was inspired by a pin on Pinterest and this image I found on the internet.  I LOVE the idea of a single place to put all my wine corks.  Before I finished the shadowbox, I was collecting them in an oversized coffee cup and when that got full I transferred some of them to a plastic container.  I definitely needed a more creative place to keep them!

Once I decided to do this, I went straight to the internet to see if I could find a sentiment regarding wine that I would want on my shadowbox.  I also posted a message to Facebook to seek some guidance and suggestions from my wine drinking friends.  Of course in doing this, my sister decided she wanted one too!  That's not a problem when it comes to my Gazelle and Funtime.

I headed out to my favorite store to get some frames.  With the sale they had going on and the added coupon I got a GREAT deal on 2 of the 11 x 14 Black Top Loading Shadowbox.


Loved the way both of these turned out!!  Now we've got a place to store our wine corks until another project comes along and we need a few for that.  :o) 
 

Thanks for looking!!
*´¨)
¸.•´¸.•*´¨) ¸.•*¨)
(¸.•´ (¸.•` ¤ Jamie*´¨)

Thursday, July 25, 2013

Vehicle Eyes


Machine Used: BossKut Gazelle
Software: Funtime Scrapbooking IV
Materials: Foam Board, contact paper

My dearest son is a HUGE Disney Cars fan.  If it isn't Lightning McQueen, then is has to be red.  For fun I just knew that he'd love it if I transformed our Jeep Wrangler into a vehicle straight out of the motion pictures that he loves so much!

Starting out with a couple pieces of black foam board, I cut them down and taped them together so that they would fit in the windshield.

Then using an image for the whites of the eyes and the eye balls, I sized them accordingly.  Then in Funtime, I cut the whites into 3 pieces so that I could cut it out in white contact paper on my 12 x 24 mat.  Carefully lining each one up to next so that it looked like one uniform piece.

With the help from Terri's latest class, I cropped the eye out of an image.  This made it easier copying it to an 8 1/2 x 11 worksheet and making a print and cut out of it.

A simple project that added a glow on my son's face!  So worth the effort and time.

I tried calling her Lightning McWrangler but my son insisted that it was Lightning McQueen.

Thanks for looking!!
*´¨)
¸.•´¸.•*´¨) ¸.•*¨)
(¸.•´ (¸.•` ¤ Jamie*´¨)

Wednesday, July 17, 2013

Construction Cone Personalized Cups


Machine Used: BossKut Gazelle
Software: Funtime Scrapbooking IV
Materials: Oracal 651 Vinyl (outdoor vinyl)

With my dearest son's 3rd birthday quickly approaching I finally decided it was time to get some things done in preparation for the party.  As I'm sure with most boys his age, Disney Cars is the way to go.  We still watch it on a daily basis and his favorite color is red, just like Lightning McQueen.

While searching for some cute ideas for his birthday I came across these construction cone cups.  They are cute but I noticed that the biggest complaint about them was the paper on the base.  I went ahead an ordered them any in hopes that I would be able to do something about that.

Fortunately the cup can actually come off the base and I was able to peel the paper off easily.  I did some basic measurements on the size of the square and the diameter of the circle.  Then with the help of the Funtime software, I was able to create the same thing and cut it in outdoor vinyl.  It wasn't the easiest thing transferring the vinyl to the base but eventually with a little patience I did the best I could.  Now a more permanent fix and it will make washing the cups A LOT easier without having to worry about wrecking it!
 

I couldn't stop at the base . . . . not since I was on a roll!!  Using the same basic shape of the Cars logo, I added each the of the kiddos names to personalize the cups.

I used the true type font Magneto and welded the letters together in Funtime.

 
A fun little thank you to the kiddos attending and a way to keep from getting the drinks mixed up!
 
More to come on my son's birthday and until then KA-CHOW!!  ;o)
 
Thanks for looking!!
*´¨)
¸.•´¸.•*´¨) ¸.•*¨)
(¸.•´ (¸.•` ¤ Jamie*´¨)

Sunday, July 7, 2013

Vinyl Decorated Mailbox


Machine Used: BossKut Gazelle
Software: Funtime Scrapbooking IV
Files Used:  Swirls 0989, Butterfly Silhouette 0327, Butterfly with Flourishes 0395, Ruffled Butterfly by Judy Stark BKD 105,
Materials: Oracal 651 Vinyl (permanent vinyl)

For this project I thought that it was about time that I added a little more decoration to our mail box.  Keep in mind that we put this mailbox up 8 years ago when we first moved in and it's just sat there . . . black and plain.  Very sad. 

I started with the "G" using the true type font Easy Street EPS.  The problem I had was this font was really thin in some spots.  To "thicken" it up I used the outline option in Special Effects.  I only outlined it by 0.01 because I didn't want to lose the "G" in the outline.

I then lined up the swirls on either side of the "G" and cut the image out as a whole making sure to use the weeding option in the Cutting Control Panel.
 
 
I used transfer tape to maintain the integrity of the design and to place it on both sides of the mailbox.
 
For additional decoration, I added several of the beautiful butterflies in no particular order.
 
 


It was a simple project that allowed me to add a lot of personality to our mailbox.  Make sure to check out the other Boss Kut Dies for inspiration on your next project!

Thanks for looking!!
*´¨)
¸.•´¸.•*´¨) ¸.•*¨)
(¸.•´ (¸.•` ¤ Jamie*´¨)
BossKut Design Team Member

For more projects and information, please click links below:
BossKut Gazelle Blog
BossKut Company Blog
Related Posts Plugin for WordPress, Blogger...